Use Code - PDM15 for a 15% off any of PDM Switch Panel w/ Relay model kits!

Ends 11/7/19

EFI Custom Control Panel System - 1 Stage NOS Progressive

EFI Custom Control Panel System - 1 Stage NOS Progressive

$2,050.00
Please List out the Relayed Circuits for your Application

  This control panel system was based on one of our most popular systems - Holley EFI Nitrous Application. This was designed around a customer who knows how to do their own electrical wiring, but wants everything included into one main system.  With this control panel, you will be able to operate a single state. Holley EFI nitrous application with ease.  While this is most commonly used with Holley EFI, there is no charge to switch it to a different style of EFI like FAST, BS3 or Fueltech.

    With this system, it is designed to operate a complete car with all of its components and accessories. Once you receive this system, you will route the separate bundles of wire to their specific locations based on the connector pin-out sheet I provide you for each output connector.  Below is a list of included circuits in this Holley EFI Custom Control Panel. This package will come with a 10 Switch, LED Backlit Switch Panel w/ 2 Dome Lights. Switch Panel can be upgraded to full billet option as well.  


Holley EFI Boosted Control Panel Package Details:

  • 10.5" x 16" in size
  • Mounted on a .040 carbon fiber sheet
  • 23 Pin Deutsch Connector -  Switch Panel Harness
  • 14 Pin Deutsch Connector - Holley Integration Wiring
  • 14 Pin Deutsch Connector - Nitrous System Solenoid Wiring
  • 31 Pin Deutsch Connector - Main Outputs 1
  • 23 Pin Deutsch Connector - Main Outputs 2
  • 75 Amp Fuel Pump Relay
  • 75 Amp NItrous Relay (Powers up 2 Holley Solenoid Drivers)
  • 2 Holley Solenoid Driver for Holley EFI Progressive Controller Option
  • 15ft WIring Harness for ALL Outputs
  • 8ft Wiring Harness for Holley Integration Wiring
  • 8ft - 6ga Red/Black Power Cables
  • 8 Switch Roll Cage, LED Backlit Switch Panel w/ 2 Dome Lights
  • Switch Panel will have pre-cut and terminated 10ft long harness w/ connector installed for connection at the Control Panel.
  • All systems are pre-tested before shipment to verify everything works as described.
  • All systems also come with a wiring pinout sheet showing what every terminal screw does, where it goes, and what color wire it is.  

Included CIrcuits:

  • Water Pump
  • Engine Fan
  • Transbrake 
  • Linelock
  • Trans Cooler Fan (Aux)
  • Starter "Solenoid" Activation Signal Wire (Integrated Thru Neutral Safety Switch)
  • Electric Shifter - Holley Activated (Aux use as well)
  • Brake Lights
  • Head Lights - Single Set Only
  • 4 Corner Parking Lights
  • 4 Corner Turn Signals w/ Integrated Brake Light Circuit
  • Holley EFI Integration Signal Wiring Inputs/Outputs to Holley from Control Panel
  • Holley EFI Dash / Racepak Dash Wiring
  • 1 Single Stage Nitrous system using 2 Solenoid Drivers for use of the Holley Internal Progressive Controller
  • Nitrous System Wired for 4 Solenoids (2 fuel - 2 nitrous)
  • Purge Solenoid
  • 10ft Wiring harness for all solenoids
  • Optional WOT Switch Wiring
  • Transbrake Switch Wiring
  • Linelock Switch Wiring
  • Brake Switch Wiring
  • Neutral Safety Switch Wiring
  • 1-3 Spare Relay Circuits (Depending on available room)
  • 4-6 Spare Ignition and Battery Fused Circuits (Depending on available room)

  • ***Optional 15ft Floating Ground Output Harness (Grounds for all components)
  • ***Optional Power Windows (Requires 12 Switch Roll Cage Switch Panel)
  • ***Optional Starter Bump Button wiring
  • ***Optional Reverse Lights
  • ***Optional Dual Set of Head Lights w/ Dimmer Switch Wiring